Cks-L Series Big Type CNC Horizontal Lathe

• Customization: Available
• Application: Metal
• Process Usage: Metal-Cutting CNC Machine Tools
• Model NO.: CKS61125L CKS61140L 60L 80L 200L
• Movement Method: Contour Control
• Control Method: Semi-Closed Loop Control
• Numerical Control: CNC/MNC
• Performance Classification: Economical CNC Machine Tools
• Certification: ISO 9001
• Condition: New
• CNC Lathe: Economic CNC Lathe

Product Description

CKS611--L SERIES HORIZONTAL CNC LATHE
       The CKS611--L series is large type horizontal CNC lathe, which adopt Bei Jing KND1000T system or SIMENS808D System. The main transmission have manual 24 level speed, it can be controlled by two axis linkage. The x axis transversal movement has been realized by ball screw and Ac servo motor, and the Z axis longitudinal movement has been realized by the Taiwan rack with AC servo motor and reducer, half closed loop control. So it has the very good positioning accuracy and repeat positioning precision.
          Machine tool bed surface is flat - V structure, which uses the high strength resin sand casting, and bed surface has been treated by middle frequency quenching treatment, which hardness is not less than HRC50, and hardening depth is deeper, so that it is benefit for secondary grinding machine tool. 
The max feature of Machine tool bed is that it has strong rigidity, large bearing capacity, good stability. The carriage adopt gluing gum craft, and it has small dynamic and static coefficient of friction due to lubrication material, so it reduced the coefficient of friction between the carriage and bed so as to prevent crawing. And we design the lathe bed with arched door for back removing chips, and chips will be directly removed into oil plate, so it is easy to clean chip.

CKS611--L Specification		parameter
Main parameter	Bed width	1100mm
	Max swing diameter over bed	φ1290mm/φ1440mm/1640mm/1840mm/2040mm
	Max workpiece length	1000-16000mm
	Max swing diameter over tool post	φ900mm/φ1050mm/φ1250mm/φ1450mm/φ1650mm
	Max bearing weight between two centers	10tons(please limit speed when workpiece is too weight)
Main transmission	Spindle front bearing	φ200mm(CKS61180Lφ220mm)
	Spindle rotation range	3.15-315r/min(24),spindle through diameterφ130mm
	Front taper of Spindle inner hole	Metric 140
	Main motor power	30kW
	Spindle nose	1:30
Feed	x/z axis travel	750(CKS61180L850mm)/1000-16000mm
	X axis rapid speed	4m/min
	Z axis rapid speed	4m/min
KND1000T CNC system Or SIMENSIS808D	X axis servo motor torque	27N.M for knd1000T ,25N.M for SIMENS 808D
	Z axis servo motor torque	50N.m for KND1000T, 48N.m for SIMENS 808D
	Vertical four position tool post	Manual tool post
	Cutting tool cross section	45×45
Special order	vertical four position automatic tool post	AK23320
	Cutting tool cross section	45×45
	vertical four position automatic tool post	AK23380
	Cutting tool cross section	55×55
Tailstock	Tailstock shaft diameter	260mm
	Tailstock shaft travel	300mm
	Tailstock shaft taper hole	Metric 80#
Auxiliary support	1m,1.5m without steady rest,2-8m with 1set, and 9-12m with 2sets,13-16m with 3sets
	Close type steady rest	120-480 for CKS61125L,40L,60L
	Close type steady rest(special order)	400-700 CKS61180L,200L
Chuck	Four jaw chuck	1250(25,40L)
	Four jaw chuck	φ1400mm(60L)
	Four jaw chuck	φ1600mm(80,200L)

Accuracy :
turning cylinder roundness                                        0.01
processing consistency(in 300mm length)                         0.04
turning flatness (in Φ300mm)                    0.025  only concave 
 
CNC controller
1.KND1000Tor SIEMENS 808D CNC system                    2.Control axis    X,Z two axis
3.Line,circular arc compensate with pitch compensation function.  4.With Usb interfact, it can realize the process and data storage each other.      5.with operational interface, liquid crystal display .Diameter or radius programming. 
 
The tool with machine and document
1. manual operational tool   1set     2. foundational screw       1set
3. operational manual       1set     4. system servo motor and servo driver etc document  1set
 
Accessories and tool

Name	Specification	Name	Specification
Center	Metric 80#	Single head spanner	16 S91-2A
Center	Q/DC Q14-2 6#	Single head spanner	18 S91-2A
Center sleeve	Metric140-morse 6	Single head spanner	21 S91-2A
Center sleeve	Metric 80-morse 6	Single head spanner	24 S91-2A
Chuck spanner		Allen wrench	6 S91-7
Tool post spanner		Allen wrench	8 S91-7
Double head spanner	8×10 S91-1	Allen wrench	10 S91-7
Double head spanner	12×13 S91-1	Allen wrench	12 S91-7
Double head spanner	27×30 S91-1	Allen wrench	14 S91-7
Double head spanner	32×36 S91-1	Hook spanner	180-200 S93-1
Double head spanner	41×46 S91-1	Hook spanner	230-240 S93-1
Pliers for Elastic ring	2.7× 175 S94-1	Hook spanner	250-260 S93-1

 
Shan dong precion group 
Dezhou precion machine tool co.,ltd
Address:No 1 west ring road, Ling Cheng, Dezhou, Shandong,P.R.China 253500
Tel: [phone] /    0086-5348292663
Fax: [phone]     
Website:precion.en.made-in-china.com